Seals For Vauxhall Signum Vectra C Z22Y Siemens 24404012 Injectors - Kit 133

We are the parts side of the Mr Injector UK business, supplying fuel injector rebuild kits worldwide.

All of our kits are assembled in the UK.

Our kits fit perfectly, this is because they are injector specific and NOT universal kits.

The seals are exacting in grade of Viton for your injector; 70-90 Shore rated.

Mr Injector UK services a wide range of petrol injectors - standard port, high pressure (GDI, FSI, etc), Siemens / Bosch Piezo, side feed, K Jetronic, air-assisted, hose to rail injectors from the 1960s onwards (including seized injectors) and cold start injectors. For injector servicing, please see our Mr Injector UK site. 

Seal Kit 133

Designed for Siemens Deka high pressure injectors to fit:

Siemens injectors 24404012

3860-501

6263A00146

This injector is fitted to the Vectra C & Signum Z22YH engine.

This kit contains the curly spacers, Teflon bushes and the Viton top rail seals.

Please note: an installation tool is required to replace the Teflon bushes onto the pintle shafts.

THE INJECTOR IS NOT INCLUDED IN THE SALE.

Seal Kit 133 for 4 cylinders, contained are:

4 x Viton top rail seals

4 x Curly spacers

4 x Teflon bush seals 

ANY INJECTOR PICTURES IN OUR LISTINGS ARE NOT INCLUDED IN THE SALE, THEY ARE THERE TO HELP YOU IDENTIFY YOUR REQUIRED KIT.

These are exacting components tried and tested, manufactured for Mr Injector UK.

They are equal to or exceed the original specification of the item fitted to your injectors.