Bosch 0261500 Compatible Later Series Injector Seal Kit With 13mm Seals -Kit 152

We are the parts side of the Mr Injector UK business, supplying fuel injector rebuild kits worldwide.

All of our kits are assembled in the UK.

Our kits fit perfectly, this is because they are injector specific and NOT universal kits.

The seals are exacting in grade of Viton for your injector; 70-90 Shore rated.

Mr Injector UK services a wide range of petrol injectors - standard port, high pressure (GDI, FSI, etc), Siemens / Bosch Piezo, side feed, K Jetronic, air-assisted, hose to rail injectors from the 1960s onwards (including seized injectors) and cold start injectors. For injector servicing, please see our Mr Injector UK site.

Seal Kit 152

Our seal and Teflon/Nylon bush kit was designed for TFSi FSi Ford and Alfa with Bosch injectors 0261500 series later type with 13mm outer diameter top seals.

These upper seals are Viton with a higher rating hardness than standard port injectors of 90shA to deal with the higher pressure.

Seal Kit 152 for 4 cylinders, contained are:

4 x upper rail seals of 13mm od

4 x lower pintle bushes

Please note that a swaging tool is needed to install the Teflon bushes onto the lower shaft of the injector. 

These are exacting components tried and tested, manufactured for Mr Injector UK.

They are equal or exceed the original specification of the item fitted to your injectors.

A little about us:

We are stockists of genuine Mr Injector UK seal kits and complete overhaul kits. We can make up custom kits or packs of single parts as needed.

We are a trustworthy, Top-rated seller, our feedback reflects this with lots of happy, real customers!

We ship from the UK to all over the world; kits are ready to ship within 1-24 hours - no waiting weeks for your parts!

Please take a look at our to see our other items, with more added frequently. If you can’t see what you’re after, please just ask as this is nowhere near our full range of stock!