LIMA 4-6-0 0-6-0 STEAM TANK ENGINE ETC TRAIN LOCO RINGFIELD MOTOR UPGRADE KIT

  Hello Thank You For Looking At The Add Please Take A Minute To Read It All. International Buyers Read Post Information.

 Here We Have a Modern Motor Upgrade Kit To Replace The Lima Ringfield Motors Fitted In Many Class Locomotives Like The HST 125 Class 43, Also Class 20, 26, 27, 31, 33, 37, 40, 46, 47, 50, 52, 55, 59, 60, 66, 67, 73, 86, 87, 92, 101, 117, DMU, Railcar, 0-6-0 Steam Locos, Etc. So Almost All That Was Fitted With The Lima Ringfield Motor. For Other Makers, Motor's And Class Locos Please See My Other Listings.

 Owe Kit's For The Lima Trains Have A 5mm Spur Gear So The Spur Don't Rub On Inner Housing The Brace Bar Must Be Loose Fitting With A Gap Between The Bar And The Motor So The Motor Can Move Slightly, This Allows It To Run Freely. A 12 Vault Motor That Is 9mm Deep To Prevent The Motor Protruding And Hitting The Body On Corners. One Wire Go's To The Motor's Wheel Pickup And The Other Wire To The Lima Wire That Go's To The Rear Bogie Wheels. We Hope We Have Addressed Issues That People Have Found With Other Kits, If You Need Help Please Message Us. 

1. 1 X 12V CD Motor (9mm Deep)
2. 2 X 8 Teeth Spur Gear's (5mm)
3. 1 X Professionally Done 3D Printed Adaptor
4. 2 X Length Of Heat Shrink Tubing
5. 1 X Back Bracing Plate (Loose Fit)

Please see the first Photo For What You Are Buying, The Second, Third And Forth Photos for Fitting And The Next Photo's For Loco Reference Only And The Last One For The Loose Fitting Of The Brace Bar, This Is Very Important For The Motor To Run Correctly. Modern CD Motors Are Instant In Movement So Use With A Variable Speed Controller Is Recommended.

       We Have Lots Of Model Railway Adds And Will Have Many More As Time Go's On So Please Do Take A Good Look At Them And Please Add Us To Your Favourites For The Future.