Bulk Toner Refill 1kg bottle for Kyocera FS-1300D FS-1350D TK-130 TK-132 Ecosys

Bulk Compatible Toner Bottle

• Premium quality Japanese toner specifically qualified for use with these models.
• Bulk 1kg bulk bottle for low running costs.
• Refill your toner cartridge. Save money and help the environment.
• The fill load for the 7,200 sheet Yield TK-130 cartridge is approximately 310 grams, so the 1kg bottle gives more than three refills.
• Comes with pouring funnel.
• There is a chip but it does not stop from printing. You can replace it to remove any warning messages that show.
• Please note that a successful refill is not guaranteed. This item is the material for refilling only (toner bottle and funnel top). It's sold as seen with no returns.
• Whilst the majority of refilled cartridges give excellent print quality, this depends on the state of your used cartridge. Since refilling is a DIY activity there is also potential for you do something wrong. If a fault develops with your cartridge you may reclaim the unused toner and use it in another one.
• This printer has a separate imaging drum unit. There is little that can go wrong with the toner cartridge.
• Instructions are included for refilling with the "Melt Hole and Pour" method, as additional information to help you with the task. There is a filler cap but usually it's welded in place. The Starter Toolkit for melting the holes, replacement chips and smaller bottles are available at the TonerTopUp online store. 
• Compatible with these printer models (cartridge references Kyocera TK-130, TK-132):