Billiger als eBay
BSA FINNED ALLOY SUMP PLATE MAGNETIC PLUG A7 A10 A65 (67-1285) with allen screws
- Zustand : Neu
- Versand : 2 Tage
- Marke : unbranded
- ID# : 225190897
- Menge : 5 Artikel
(noch verfügbar: 5) - Besucherzahl : 31
- Ort : Großbritannien
- Verkäufer : nookys.nuts (+8)
- Barcode : Keine
- Beginn : Sa 21 Dez 2024 10:19:26 (CEST)
- Ende : Läuft-bis-verkauft
- Verbleibend : Läuft-bis-verkauft
Auslandsversand nach Deutschland 
von 1 Artikel(n) ändern
von 1 Artikel(n) ändern
Weiterer Int. Zusteller = £9.50 (10,99€)
Weiterer Int. Zusteller = £14.60 (16,89€)
Weiterer Int. Zusteller = £14.60 (16,89€)
Versandkostenrechner
Weiteres von diesem Verkäufer Alle anzeigen
Beschreibung (Anbieter)
Brand new BSA alloy finned sump plate with magnetic drain plug, one gasket, four spring washers and four allen screws.
For BSA 'A' series; Pre-unit twins; A7, A10, RGS models. Unit twins; A50 (Can fit A65 but needs machining out to accommodate aftermarket filter gauze).
BSA unit singles except C15 & B40.
B25 - This sump plate has found to line up with the holes on a B25 Starfire and B25SS Goldstar, but not using an aftermarket gauze filter (supplied separately (even the correct B25 aftermarket gauze filter)). In order to accomodate an aftermarket filter, the rim of the crank side of the sump plate needs machining out, just like the A65 model.
The A7/A10 gauze filters do not fit the B25 because the scavenge pipe is a different size and in a slightly different location. A gauze filter is not supplied with this item.
Thickness
- these sump plates are thicker than original scavenger plates, so they
hang down lower. 37.4mm is the thickness including the screw. Without
the screw, the thickness is 29mm.
Good quality.
PLEASE NOTE: Sump plates now only come with one gasket.
To replace BSA part number 67-1285 and 41-0620. (B25 sump cover 67-1286).
I also stock the sump plate with studs rather than allen screws.
I also stock this sump plate with the aftermarket filter; item number: 293411392702.
I also stock the gauze filter on its own, search item number: 303434517753.
A65s may require machining - If using original filters there should not be a problem . However if used with aftermarket filters, then machining would be required. Aftermarket gauze filters have a lip on that does not fit flush with the sump plate. Therefore the large hole in the sump plate requires a small amount of machining to accommodate it. If you are unsure or do not have the knowledge/expertise to undertake any machining then please do not buy. Once the sump plate has been damaged in anyway, it cannot be returned.
Nooky's Nuts have been trading cycle thread and bsf nuts, bolts and washers for many years at autojumbles across the country.
Nooky's nuts now have a website.
If you purchase multiple items, we will weigh the items and invoice accordingly, however if it is heavy, there may not be a discount, if it is light, then there possibly will. We will try to make p&p as low as possible. However bear in mind that the postage cost paid is for packaging also.
Ausschreibungsinformation
| Ausschreibungsart | Galerie-Ausschreibung |
| Ausschreibung Nr. | 225190897 |
| Startzeit | Sa 21 Dez 2024 10:19:26 (CEST) |
| Endzeit | Läuft-bis-verkauft |
| Startgebot | Festpreis (Bieten nicht möglich) |
| Artikelzustand | Neu |
| Gebote | 0 |
| Besucherzahl | 31 |
| Versandzeit | 2 Tage |
| Menge | 5 |
| Ort | Großbritannien |
| Automatisch verlängern | Nein |
Neueste Vekäuferbewertungen
Rückgabebestimmungen
Rücksendung akzeptiert
Refund Type:
Shipping Cost Paid by: Buyer
Returns Within: 30 days
