Vector 0179 (8001DP) 3-Hole Pads and 2 Busses Circbord/Vectorbord [punchboard]

Vector 0179 (8001DP) Circbord / Vectorbord

Manufacturer Description:

• 4.5" x 6.50", Hole Dia.: 0.042", Grid: 0.100" x 0.100"
   

  3 Hole Solder Pad

   

  Circuit pattern etched onto wiring side only

  Solder mount DIP sockets or IC devices with any lead spacing

  3-hole solder pads (0.28” x 0.080”) for interconnecting multiple component leads

  Single-sided with no etch and plating on reverse side

  Layout paper .......... Layout Paper(PDF)

  Circuit Pattern	: 3 Hole Solder Pad
  Contacts	: N/A
  16 Pin DIP Capacity	: 20
  Hole Diameter	: 0.042" { 1.0668 mm }
  Grid	: 0.100" x 0.100" { 2.54mm X 2.54mm }
  Dimension { H, W, T }	: 4.50" x 6.50" x 0.062"
  Material	: CEM-1
  Wire-Wrap Terminals	: T44, T46, T49, T68
  Solder Terminals	: T42-1, K24C, K31C
  Wire-Wrap Socket Pins	: R32
  NEMA Grade	: CEM-1
  UL Flammability Class	: 94V - 0

Packaging says:

• Universal I/O area for mounting any type board connector
• Mounts 20 16-pin DIPs, or mix
• Mounts any width DIP I.C.s
• Easy multiple connections to 3-hole pads
• Quick solder mounting of DIP sockets
• COnvienient power and ground busses
• .04" diameter holes on 0.1" grid
• 4.5" x 6.5" x .062"

• 3 Hole Pads & 2 Busses, Bare Other Side

My additions to this:

• Has 8 rows of 48 3-hole wide pads.
• Buses alternate between rows of pads
• One end has 7-hole x 34-hole area with single hole solder pads but no interconnections between those holes.