PreFormed Ready to Tile Soap Niche

PreFormed™ Soap Dish

Approx pre-finished dimension

Back = 9 1/4" x 9 1/4" depth = 3 1/2"

Front net 8 1/4" x 8 1/4 depth = 3 1/2"

PreFormed™ Niches... Anywhere you want to store, display... bath, kitchen, hall or exterior wall. PreFormed™ Niches are amazingly versatile. Easy to install, and ready to tile in minutes.

Their unique design allows you to tile with the same tile as the surrounding walls.

PreFormed™ Niches are a one-piece construction, and waterproof. Guaranteed to never rot, degrade, or leak. Their insulative factor does not promote condensation in the wall cavity.

Materials: Saw or utility knife for cutting substrate layer out of niche location. Polyurethane sealant and fiberglass mesh.

Installation to Existing 2 x 4 Wall

1 Determine desired height of niche and draw level line on substrate layer.
2 Place niche with the bottom flange of the box centered on the level line.
3 Trace exterior flanges.
4 Cut along line and remove substrate layer. If accessible, install 2 x 4 horizontal cross bracing to support niche.
5 Use polyurethane sealant to adhere niche to studs.
6 Seal joints between niche and backer board using polyurethane sealant or fiberglass mesh and liquid waterproof membrane
7 Install tile according to Tile Council of North America (TCNA) guidelines.

Installation in new Construction

1 Determine desired height of niche and mark 2 x 4 accordingly.
2 Install horizontal cross bracing to support niche.
3 Use polyurethane sealant to adhere niche to studs.
4 Next, install 1/2" backer board on all walls and flush to niche 1/2" flanges.
5 Seal joints between niche and backer board using polyurethane sealant or fiberglass mesh and liquid waterproof membrane.
6 Install tile according to TCNA guidelines.

Easy, Waterproof, Worry Free. The difference is CLEAR.

The "Anywhere" Solution

Click here for more Information