TUBE SLEEVING CABLE BLACK HEAT SHRINK CAR ELECTRICAL VARIOUS SIZES & LENGTH

TUBE SLEEVING CABLE BLACK HEAT SHRINK CAR ELECTRICAL VARIOUS SIZES & LENGTH

• General purpose polyolefin heat shrink, with a 2:1 shrinkage rate this tube shrinks to half of its diameter.
• Stated sizes are internal opening diameters (not flat width) prior to shrinking.
• High quality, cost effective, commercial grade for electrical, electronic, automotive and general industrial markets.
• All our heat shrink tube is plain with no markings.
• High strength and resilience.
• Minimum Shrinkage Temperature ~ +70° C
• Full Recovery Temperature ~ +100°C
• Operating Temperature ~ -55°C to +125°C
• Tensile Strength ~ 14Mpa
• Dielectric Strength ~ 20kv/mm
•  
• 1.2 = 3mm (Flat measurement)
• 1.6 = 4mm (Flat measurement)
• 2.4 = 5mm (Flat measurement)
• 3.2 = 6mm (Flat measurement)
• 4.8 = 9mm (Flat measurement)
• 6.4 = 11mm (Flat measurement)
• 9.5 = 16mm (Flat measurement)
• 12.7 = 21mm (Flat measurement)
• 19.1 = 30mm (Flat measurement)
• 25.4 = 41mm (Flat measurement)
• 38.1 = 65mm (Flat measurement)
• 50.8 = 82mm (Flat measurement)
• 76.2 = 135mm (Flat measurement)
• 101.6 = 165mm (Flat measurement)
• RoHS Compliant
• Picture is for information only, this is not a mixed pack.
• Due to the way heat shrink tube is manufactured it is often a little larger than its stated pre-shrunk size, however the tube will always shrink to 50% of the stated pre-shrunk size.