Features and benefits
- High performance in cracked and non-cracked concrete confirmed by ETA
- Product recommended for applications requiring fire resistance Internally threaded to be used with threaded stud or bolt
- Easy to install by hammer action and manual setting tool Slotted sleeve and internal wedge component together facilitate easy setting and expansion
- Product is covered with European Technical Assessment for multi-point non-structural fixings
Applications
- Pipelines systems
- Ventilation systems
- Sprinkler systems
- Cable conduits and wires
- Gratings
Base materials
Approved for use in:
- Cracked concrete C20/25-C50/60
- Non-cracked concrete C20/25-C50/60
- Unreinforced concrete
- Reinforced concrete
Installation guide
1. Drill a hole of required diameter and depth
2. Remove debris and thoroughly clean hole with pum
3. Insert wedge anchor, slotted end first
4. Use the setting tool to drive the internal wedge into the anchor
5. Insert bolt or stud through fixture and tighten to the recommended torque