Classic Car Fuel Injection Conversion - Self Tuning for Improved Starting, Performance, Drivability and Fuel Economy
Coolant Temperature Sensor for our Classic Fuel Injection system.
Available here as a separate part, or buy with the other sensors in our engine sensor kit of parts
Some of the other components for our CFI system available in our shop, for a full list of our Classic Fuel Injection products visit us on the web
Classic Car Fuel Injection Conversion - Update your classic for Improved Starting, Performance, Drivability and Fuel Economy With our unique professionally designed Classic Car Injection kit you can update and improve your vehicle giving you full control of both the Fuel and Ignition Systems.
It gives you full ECU control of the entire Fuel and Ignition Systems using full 3D look up tables. The 3D tables allow you to specify over 250 individual values of spark ignition timing based on engine speed, throttle angle, manifold vacuum etc. With more than 800 differing fuel values available you can be sure of always having the correct fuelling at all engine speeds, loads and temperatures.
Easily fitted to many classic cars it can be installed by professionals and home mechanics alike. You do not need to understand fuel injection systems as long as you have some mechanical ability and some basic PC skills you can fit and tune this system.
Our Classic fuel Injection system is a self tuning fuel and ignition system that automatically learns the correct fuelling for your vehicle. After fitment fitted the system self tunes to teach itself the precise fuelling requirements. You may have over 800 different fuelling values but do not panic the system will figure it out itself as you drive.
Just fit the system, get the vehicle started and then drive it. The more you drive it the better it gets as the system automatically learns and adapts to your vehicle.
After a few journeys the system will be fully adapted to your vehicle and from then onwards you can just drive as you would normally.
For those preferring not too get involved we can offer full installation, setup and calibration services if required
Benefits of Converting your Classic Car to our CFI Self Tuning Electronic Fuel Injection
The major benefits of our CFI system is much better control of both the fuel and ignition systems. This means the engine can be tuned for best power and best fuel economy at any given speed without the limitations imposed by the more traditional carburettor and mechanical distributor This happens automatically many times per second and is controlled by the ECU in response to your driving style and engine operating parameters.
Accurate computer control of fuel and ignition allow improvements in many areas including -
More Power - Improved fuel and ignition control means more power from your engine.
Save Fuel - Better fuel control means less wasted fuel and better combustion control and lower emissions.
Easier Starting - Starting performance improved both cold and hot, no choke to keep changing. Just start it up and let it take control.
Improved Reliability - It just works and keeps working the way it should.
Smoother Driving - Less flat spots than the original system, drives more like a modern car.
More Responsive - Smoother and better throttle response over all engine speeds, loads and temperatures.
More performance - Increased Power and Torque allows overtaking and acceleration easier.
Fit and Forget - No re-tuning required, once mapped to your engine it stays that way
Classic Fuel Injection - Will it fit my vehicle ? We have purposely designed our CFI range to fit as many classic car makes and models as possible.
It can be fitted to 4 cylinder, 6 cylinder or 8 cylinder engines with either 1, 2, 3 or even 4 carburettors .
Our initial kits are aimed at vehicles fitted with the ever popular SU range of carburettors but will be expanded to suit other types.
Our design allows the CFI system to be fitted to virtually any vehicle that has one or more carburettors. Even if your vehicle is fitted with some very odd carburettor our system can be easily adapted to fit.
Our design philosophy for this system is simple
1 - Easy to fit 2 - Easy to set up 3 - Keep the vehicle looking as standard and original as possible 4 - Use quality proven components from the OE motor industry 5 - Adaptable to as many classic cars as possible 6 - Keep the system effective but simple 7 - Provide a low cost alternative to the existing complicated systems on the market 8 - Retain the ability to return the vehicle to standard specification with minimal work or expenditure.
Proven, Tested and Quality Components Our system is designed to utilise quality tried and tested components from the OEM motor industry. All the major components have been designed, tested and used on countless vehicles around the world. This means the design of all the key components of our system have already benefited from countless hours of testing and development courtesy of the original vehicle manufacturer.
About Us Classic Fuel Injection is a registered trading name of KEE Automotive Ltd. We have over 30 years experience working for the OEM motor industry on their new vehicle projects specialising in the design and development of automotive electrical and fuel injection systems.
Using this experience we have developed this simple but effective fuel injection system to allow conversion of earlier carburettor vehicles to a more modern and usable fuel injection system .
Added by the Seller on Wed 12 Jun 2019 11:00:26 (BST)
For International Shipping please contact us for a quote.
For Classic Fuel Injection Kits
Costs vary from £75 to £200 GBP depending on which country the package is sent to.
( Package typically 15 kg and 40cm x 40cm x 40cm)
Packages sent using UPS / FED EX or similar.
Classic Fuel Injection kits are built to order with a dispatch date typically 7 to 10 days from order.
Components and small parts normally dispatched within 2 days
Listing Information
Listing Type
Gallery Listing
Listing ID#
182547992
Start Time
Wed 12 Jun 2019 10:44:03 (BST)
Close Time
Run Until Sold
Starting Bid
Fixed Price (no bidding)
Item Condition
New
Bids
0
Views
255
Dispatch Time
4 Days
Quantity
99
Location
United Kingdom
Auto Extend
No
Seller Recent Feedback
Returns Policy
Returns Not Accepted
Purchase Activity
Winning Bids
Bidder
Bid Time
Bid
Qty
No Bids as of Yet
Important :Multiple items available. See more info links above in the "Bid" or "BuyNow" forms.
for 1 item(s)
