100 Pieces Tile Leveling System Reusable

Tile leveler, your great helper for install floor ceramic tile.

- Not only can keep the tile balance on the same horizontal position, but also prevent tiles from moving while it is curing

Specifications:
Material: PP plastic and stainless steel
Suitable for tile thickness: 3-18 mm
Color: black and orange
Quantity: 100 pieces


How to use it:

Step 1:Please Leave more than 2 mm seams when you pave the first tile.

Step 2:Secondly,insert the T-neddle along the tile gap carefully.

Step 3:Then rotate it 90 degrees, clamp the T-needle at the bottom of the bricks tightly.

Step 4: Adjust the caps with the special wrench until the two tiles on the same level.

Step 5: Before the cement is completely dry (usually 4-6 hours), loosen the adjustment cover slowly, then rotate the T-needle 90 degrees to remove


Tips:
1.You can clean them before the tile adhesive dries and they can be reused many times.

2.Before tightening the caps, it is recommended to rotate the T-pin several times to make enough room for surrounding cement or tile glue, so that you can removed the regulator easily removed.