0280150105 Bosch injector hose replacement kit V8

8 x pieces of ARAMID REINFORCED  Din 73379 Type 3E hose cut to  length 65mm for your V8 Land Rover Range Rover  fitted with Bosch 0280150105 hose to rail injectors
3.5 litre V8 22/23D 1985-1989

8 x fuel line clips matched
8 x hose ferrules

READ BELOW IF YOU ARE UNSURE OF WHY WE USE THIS Aramid REPLACEMENT HOSE

HOSE KIT 88

to suit very early series Bosch EV1  jetronic type injectors with a double arrow headed inlet port

requiring hose clip clamping to fuel rail and  the double arrow headed ferrule fixing to injector

CHECK OUT THE ADDITIONAL PICTURE TO IDENTIFY THE DOUBLE ARROW HEADED INJECTOR INLET PIPE TYPE

These ARE exacting items, the hose and clip combination have been perfectly matched to the original injector parts

THIS HOSE IS EXPENSIVE BUT IT IS THE CORRECT HOSE TO USE, USING ANY OTHER TYPE OF HIGH PRESSURE FUEL HOSE COULD COMPROMISE YOUR CLASSIC VEHICLE

The hose is Ethernol resistant 100% its used in Aviation  & Aerospace

use this kit to replace your old Polyester reinforced rubber fuel feed pipe because over time if you do not it will leak

ARAMID = this is the only hose to use now, new levels of ETHERNOL present in fuels in the UK will slowly eat your old type polyester reinforced hose with disasterous consequences, this hose conforms to Din 73379 type 3E

there is at present some 10% ethernol in UK fuels set to rise each year

there is up 25% present in some European countries and rest of the World

You can not afford not to change the fuel line hoses on your injectors