Billiger als eBay
Billiger als eBay
Triumph & BSA 3 & 4 spring clutch locking tool A7/A10 A55/A65 T100 T140
- Zustand : Neu
- Versand : Am nächsten Tag
- Marke : unbranded
- ID# : 225191072
- Menge : 3 Artikel
(noch verfügbar: 3) - Besucherzahl : 27
- Ort : Großbritannien
- Verkäufer : nookys.nuts (+8)
- Barcode : Keine
- Beginn : Sa 21 Dez 2024 10:20:05 (CEST)
- Ende : Läuft-bis-verkauft
- Verbleibend : Läuft-bis-verkauft
Auslandsversand nach Österreich 
von 1 Artikel(n) ändern
von 1 Artikel(n) ändern
Weiterer Int. Zusteller = £7.80 (9,04€)
Weiterer Int. Zusteller = £13.70 (15,87€)
Weiterer Int. Zusteller = £13.70 (15,87€)
Versandkostenrechner
Weiteres von diesem Verkäufer Alle anzeigen
Beschreibung (Anbieter)
Brand new Triumph & BSA clutch locking tool for 3 and 4 spring clutches. This tool has 4 holes, unlike some others. These holes are for easy removal when fitting the clutch centre nut.
Suitable for; BSA A7 and A10 with 4 spring clutches. Will fit BSA A50 and A65 with 3 spring clutch. Please note that this WILL NOT fit early A50 and A65s with 4 spring clutches where the ears on the friction plates are tapered, but should fit earlier models with 4 spring clutch.
Good quality precision laser cut. Triumph & BSA part number: 61-3760.
If you purchase multiple items, we will weigh the items and invoice accordingly, however if it is heavy, there may not be a discount, if it is light, then there possibly will. We will endeavor to make p&p as low as possible. However bear in mind that the postage cost paid is for packaging also.
Suitable for; BSA A7 and A10 with 4 spring clutches. Will fit BSA A50 and A65 with 3 spring clutch. Please note that this WILL NOT fit early A50 and A65s with 4 spring clutches where the ears on the friction plates are tapered, but should fit earlier models with 4 spring clutch.
Will fit Triumph pre unit twins and unit 650/750. Triumph, Bonneville Tiger T100, T120, T140 with 3 or 4 spring clutches.
Please note that this tool will only fit clutches where standard clutch friction plates are provided. If the clutch has been replaced with a drive belt, it will likely not fit, as special friction plates may be fitted. But it could fit with expert alteration, as it will file easily. (If you do decide to alter the clutch locking tool, the item is not returnable).
Will NOT fit plunger/rigid BSA A10/A7 or rigid/plunger BSA 'B' and 'M' models.
Before bidding, please make sure this is the correct clutch locking tool for your model. If in doubt, please ask, we are happy to help.
Good quality precision laser cut. Triumph & BSA part number: 61-3760.
Nooky's Nuts have been trading cycle thread and bsf nuts, bolts and washers for many years at autojumbles across the country.
Nooky's nuts now have a website;
If you purchase multiple items, we will weigh the items and invoice accordingly, however if it is heavy, there may not be a discount, if it is light, then there possibly will. We will endeavor to make p&p as low as possible. However bear in mind that the postage cost paid is for packaging also.
Ausschreibungsinformation
| Ausschreibungsart | Galerie-Ausschreibung |
| Ausschreibung Nr. | 225191072 |
| Startzeit | Sa 21 Dez 2024 10:20:05 (CEST) |
| Endzeit | Läuft-bis-verkauft |
| Startgebot | Festpreis (Bieten nicht möglich) |
| Artikelzustand | Neu |
| Gebote | 0 |
| Besucherzahl | 27 |
| Versandzeit | Am nächsten Tag |
| Menge | 3 |
| Ort | Großbritannien |
| Automatisch verlängern | Nein |
Neueste Vekäuferbewertungen
Rückgabebestimmungen
Rücksendung akzeptiert
Refund Type:
Shipping Cost Paid by: Buyer
Returns Within: 30 days
