When Tyranny Becomes Law Rebellion is Duty Punisher #2 Car Truck Van Window or B

Thank you for visiting my listing! Now more than ever it is so important to BUY AMERICAN! Don't waste your money on cheap Chinese decals that take forever to arrive(if they arrive at all), have no tracking, and are of inferior quality that you will find in my decals! My decals are Made In The USA and the materials I use are Made In The USA! I personally design, cut & ship my own decals right here in Virginia Beach, Virginia here in the USA. This listing is for one(1) When Tyranny Becomes Law Rebellion Is Duty Punisher #2 2nd Amendment vinyl die-cut decal. This decal is one color and has no background. The background is the color you adhere it to. Colors: Please choose your color. The 12 colors I offer are as follows: White, Yellow, Pink, Burgundy, Green, Lime Green, Black, Silver, Gold, Blue, Orange & Red. If you are putting these on tinted windows lighter colors work best. Black will not show well on tinted windows. Sizing: Sizes are approximate. They are listed as Height x Width in inches ("). This particular decal is either 5", 6", 7", 8", 9", 10" 12", 14 or 16" square. If you need another size I can make any size you want just let me know and I will make it happen for you! The product I use is called ORACAL 651. This is an outdoor vinyl that when installed correctly will last 6-7 years. I use the highest quality clear transfer tape that is made in America. HOW TO EASILY APPLY YOUR DECAL STEP 1: Clean the area thoroughly with rubbing alcohol or water. Do not use Windex, Glass Cleaner or similar products because it will leave a residue behind that will prevent the decal from adhering well or at all. STEP 2: Prepare the decal for application by firmly rubbing a squeegee or credit card across the transfer tape with the Blue Gridlines on it. Please note: The blue lines are not printed on the decal but is part of the transfer tape and will be removed with following t the rest of the steps. This removes any air bubbles that may have formed and makes the decal cling to the Blue Grid transfer tape. STEP 3: Peel the white grid paper of the back of the decal. (STOP) If it clings to the backing, slowly replace the paper backing and repeat STEP 2 STEP 4: Slowly lower the decal onto the recently cleaned surface Note: If the surface is still damp or too cold the decal will not apply or will partially apply, then rub it in place firmly with a credit card or squeegee. For best results, if cold wait 24 hours before moving to the next step STEP 5: Slowly peel the Blu Grid transfer tape off at an angle. Be careful not to pull any pieces of the decal off the surface. If sticker pulls away please repeat STEP 4: *Use a pin to poke any air bubbles in the center and push the air out through the hole. *For best results do not apply a sticker in extreme hot or cold temperatures below 55 Fahrenheit. Can be applied to: Automobile windows/paint, trailers, walls, toolboxes, laptops, game consoles, motorcycles, helmets, skateboards, snowboards, surfboards, instruments, any non-porous surface that is smooth & clean, etc. Application Tips: The surface temperature should range from 55 degrees F - 90 degrees F. Surface prep is key for long vinyl life. Make sure the surface is clean of oil and debris. Decals should NOT be applied in the rain or snow. Customer Satisfaction is of my utmost concern! The customer is still KING in my business! If you are not happy for any reason please send me a message first before leaving negative feedback. I promise you that we can work out any problems that may arise. I am not responsible for incorrect installation.

Exported By ExportYourStore