Sea Eagle SE9 Startup Pkg Inflatable Boat -2 Oars 2 Seats Pump - Free Shipping!
- Condition : New
- Dispatch : More than 4 Days
- Brand : None
- ID# : 230504045
- Barcode : None
- Start : Fri 13 Jun 2025 17:12:10 (EDT)
- Close : Run Until Sold
- Remain : Run Until Sold


Shipping Calculator
Seller's Description
SEA EAGLE 9 SE9 INFLATABLE BOAT STARTUP PACKAGE SEAT, OARS, FLOOR, PUMP
IF YOU WERE TO PURCHASE EACH ITEM IN THIS PACKAGE SEPARATELY YOU WOULD PAY: $833.00!
YOU ARE GETTING
(IF INTERESTED IN A QUANTITY GREATER THAN WHAT YOU SEE AVAILABLE HERE, PLEASE USE THIS MARKETPLACE MESSAGING SYSTEM - USUALLY A LINK LABELED "CONTACT SELLER" - SO WE CAN ADJUST QUANTITIES. WE OFTEN DO NOT ADVERTISE THE ACTUAL TOTAL NUMBER OF AVAILABLE UNITS.)
This package has everything you need for rowing, fishing or running moderate whitewater at an extremely affordable price! Equipped with a high pressure inflatable floor and seats that are removable, I-beam reinforced, and encased in their very own superior high strength protective nylon fabric sheath.
The entire Startup Package: hull, floor, seats, paddles, pump, and repair kit fits easily into a Sea Eagle All Purpose Carry Bag* and weighs just 63 lbs, fully assembled. This lightweight, affordable, inflatable fishing boat holds up to 4 people, is super stable and works great with small gas or electric motors!

Introduced in the early 1980s - Sea Eagle Motormount Boats are incredibly safe in almost any sea conditions because of their wide stance on the water and high hull configuration. The large air chambers and high flotation value of Sea Eagle Motormount boats allow them to carry an unbelievable weight load. These features make these boats super safe for everyone in the family to use. They also make these boats perfect for a wide variety of activities...from river running to yacht tending to fishing to just plain recreational fun on the water!
***BECAUSE MOTORS CAN BE MOUNTED ON ALL SE9's, SEA EAGLE DEFINES ALL OF THEIR SE9's AS 'MOTORMOUNT BOATS'. HOWEVER, THIS PARTICULAR 'START-UP' PACKAGE DOES NOT INCLUDE AN ACTUAL MOTORMOUNT.***

Safety Air Chamber Going All The Way Around The Top Of Main Air Chamber - Perhaps the most important feature for safety and extra inside space is the unique chamber on chamber design of this series. Literally a boat on top of a boat this design feature gives several advantages. Because the safety chamber is well above the main chamber it is nearly impossible to puncture both air chambers at the same time. In addition the fact that the chamber is on top of a chamber rather than side by side means a dryer cockpit and maximal interior space.
Two Easy To Open and Shut Floor Drains
Removable Reinforced Inflatable Floor and Seats
The removable, double layer reinforced, 4" thick, (9) chamber, (8) I-beam constructed, 38 mil PolyKrylar™ inflatable internal floor is securely seated within an indestructible external nylon fabric protective sheath outer layer. Able to be inflated up to 2 psi verses traditional less than 1 psi floors, provides incredible rigidity and stability, improves performance and handling, enhances portability and stow-ability. 14" high inflatable seat improves field of vision and is great for fishing! 4" high inflatable seat sits low for comfort and ease!
SE9 Specifications
Exterior:
11' x 4' 8"
Weight:
35 lbs. (hull only), 50 lbs. (w/ inflatable floor & motormount)
Load Capacity:
4 Adults or 1200 lbs.
Engine Capacity:
3 hp gas (45 lbs. max weight) 15" shaft gas engine or up to 74 lb. thrust electric motor
Interior:
7' 6" x 2' 4"
Tube Diameter:
15"
Deflated:
26" x 26" x10"
Chambers:
4 (main & upper safety chamber, motormount support & 1 in floor)
Material:
38 mil Polykrylar (K80 PVC)
Seam:
High Frequency Weld
Floor:
Inflatable Removable Double Layered Reinforced 4" thick I-beam constructed w/ external protective sheath
Air Valves:
4 Deluxe One Way
Speed Estimates:
5-6 mph w/Gas, 4-5 mph w/Electric
Inflation & Assembly time:
15 mins.
Exterior: | 11' x 4' 8" |
---|---|
Weight: | 35 lbs. (hull only), 50 lbs. (w/ inflatable floor & motormount) |
Load Capacity: | 4 Adults or 1200 lbs. |
Engine Capacity: | 3 hp gas (45 lbs. max weight) 15" shaft gas engine or up to 74 lb. thrust electric motor |
Interior: | 7' 6" x 2' 4" |
Tube Diameter: | 15" |
Deflated: | 26" x 26" x10" |
Chambers: | 4 (main & upper safety chamber, motormount support & 1 in floor) |
Material: | 38 mil Polykrylar (K80 PVC) |
Seam: | High Frequency Weld |
Floor: | Inflatable Removable Double Layered Reinforced 4" thick I-beam constructed w/ external protective sheath |
Air Valves: | 4 Deluxe One Way |
Speed Estimates: | 5-6 mph w/Gas, 4-5 mph w/Electric |
Inflation & Assembly time: | 15 mins. |
Standard Features
NMMA & CE Certified Removable high pressure (up to 2 psi) I-beam reinforced inflatable floor encased in superior high strength protective nylon fabric sheath for rigidity Two movable reinforced inflatable seats encased in superior high strength protective nylon fabric sheath for rigidity All around grab line Bow towing grommet Bow carry handle Molded oar clasps Four molded oarlocks Safety chamber above main chamber Pressure Gauge, Repair Kit & Instructions***BECAUSE MOTORS CAN BE MOUNTED ON ALL SE9's, SEA EAGLE DEFINES ALL OF THEIR SE9's AS 'MOTORMOUNT BOATS'. HOWEVER, THIS PARTICULAR 'START-UP' PACKAGE DOES NOT INCLUDE AN ACTUAL MOTORMOUNT.***

Material
MODERATE-PRESSURE FABRIC FOR OUR SMALLER & LIGHTER BOATS
We use moderate-pressure fabric for our Sport Kayaks and Motormount Boats. All require a tough, durable hull material that will stand the test of time but high air pressures are not needed since they’re designed for moderate whitewater use and take smaller motors.
THE UNIQUE STRENGTH OF K-80 POLYKRYLAR MODERATE PRESSURE MATERIAL:
-Uniform throughout for clean, perfect welding – K-80 Polykrylar is designed for efficient production using high-frequency electric welding. It welds smoothly and evenly, ensuring two pieces become one for highest quality.-Extraordinary tear resistance – K-80 Polykrylar has equal tear resistance in every direction. Should your boat ever experience a sharp impact with a pointed object, a small hole will not “zipper” into a big problem unlike materials used by other inflatable boat companies.
-Extra-thick material – We use a thicker material, size for size, than any other inflatable boat. In most cases, our K-80 hull is actually THICKER than many more expensive supported fabric materials.
-Long life additives – K-80 is formulated with special additives to guarantee long term resistance to ultraviolet (UV) rays, gasoline, oil, and other chemicals.

***IMPORTANT INVENTORY NOTICE***
UNLESS STATED OTHERWISE AT THE VERY BEGINNING OF THIS DESCRIPTION, AT THE TIME OF THIS POSTING, THIS ITEM WAS IN STOCK AND TAKES ABOUT 5BUSINESS DAYS AFTER RECEIPT OF PAYMENT TO PROCESS BEFORE LEAVING THE WAREHOUSE AND ANOTHER 3-8 BUSINESS DAYS BEFORE IT ARRIVES AT YOUR DESTINATION. HOWEVER, THIS MARKETPLACE IS NOT OUR ONLY SALES VENUE. EVERY DAY WE SELL IN MANY DIFFERENT MARKETPLACES (VIRTUAL AND NOT) AND VIA MANY DISTRIBUTION AND SALES CHANNELS AND ON OCCASION, A SINGLE PURCHASE ORDER FROM ONE OF OUR OTHER SALES CHANNELS CAN DEPLETE STOCK. IF BY CHANCE THIS HAPPENS AT THE TIME OF YOUR ORDER, WE WILL OF COURSE, ASK IF YOU WOULD LIKE A 100% REFUND OR IF YOU WOULD LIKE TO HOLD OUT FOR OUR NEXT ARRIVING BATCH OF STOCK FOR WHICH WE WILL PROVIDE AN ETA.
Delivery, including packaging, handling and insurance anywhere to the 48 Continental U.S. States for each item (or pair of items or multiple items if posting references an offer of more than one item) is FREE! Alaska, Hawaii and Puerto Rico delivery for additional $229 which WILL BE AN ADDITIONAL AMOUNT ADDED TO YOUR REVISED INVOICE AFTER YOUR INITIAL PURCHASE. Sorry but shipping is not available to to APO or FPO VI or International Addresses. Thank you.
WE MUST HAVE 2 THINGS BEFORE WE CAN SHIP:
1.) A VERIFIED & CONFIRMED PAYPAL ADDRESSES IF USING PAYPAL.
2.) AN ACCURATE PHONE NUMBER FOR OUR SHIPPING AGENT.
ACCEPTANCE GUIDELINES
1.) INSPECT FOR VISIBLE BOX/PACKAGING DAMAGE.
2.) REJECT ONLY DAMAGED MERCHANDISE. ACCEPT ANY MERCHANDISE THAT IS NOT DAMAGED.
PAYMENT METHODS
QUESTIONS?
EMAIL ANYTIME USING THIS MARKETPLACE’S MESSAGING SYSTEM (‘CONTACT SELLER’) OR LOOK UP 'EVERYTHINGHOME INC JAX FL', WEEKDAYS, 9 AM - 5:30 PM, EASTERN TIME.
PRIVACY NOTICE:
We do not sell or rent our customer information to any outside party under any circumstances.
Listing Information
Listing Type | Gallery Listing |
Listing ID# | 230504045 |
Start Time | Fri 13 Jun 2025 17:12:10 (EDT) |
Close Time | Run Until Sold |
Starting Bid | Fixed Price (no bidding) |
Item Condition | New |
Bids | 0 |
Views | 5 |
Dispatch Time | More than 4 Days |
Quantity | 4 |
Location | United States |
Auto Extend | No |
Seller Recent Feedback
Returns Policy
Refund Type: Money back or replacement (buyer's choice)
Shipping Cost Paid by: Buyer
Returns Within: 30 Days