PreFormed Ready to Tile Wide Combo Recess
- Condition : New
- Dispatch : Not given
- Brand : None
- ID# : 76895345
- Quantity : 25 items
(still available: 25) - Views : 223
- Location : United States
- Seller : tiledepotus (+136)
- Barcode : None
- Start : Thu 27 Sep 2012 19:03:00 (EDT)
- Close : Run Until Sold
- Remain : Run Until Sold
More Listings from This Seller view all
Seller's Description
PreFormed™ Wide Combo Recess 12 x 21
Approx pre-finished dimension
Face = 15 3/4" x 23 3/4"Back = 14 1/4" x 22 1/4" depth = 3 3/8"
Front net 12 1/4" x 6 1/4" and 12 1/4" x 12 1/4 = 12 1/4" x 20 1/4 , depth = 3 1/2"
Marble shelf are avialable for this model
PreFormed™ Niches... Anywhere you want to store, display... bath, kitchen, hall or exterior wall. PreFormed™ Niches are amazingly versatile. Easy to install, and ready to tile in minutes.
Their unique design allows you to tile with the same tile as the surrounding walls.
PreFormed™ Niches are a one-piece construction, and waterproof. Guaranteed to never rot, degrade, or leak. Their insulative factor does not promote condensation in the wall cavity.
Materials: Saw or utility knife for cutting substrate layer out of niche location. Polyurethane sealant and fiberglass mesh.
Installation to Existing 2 x 4 Wall
1Determine desired height of niche and draw level line on substrate layer.
2 Place niche with the bottom flange of the box centered on the level line.
3 Trace exterior flanges.
4 Cut along line and remove substrate layer. If accessible, install 2 x 4 horizontal cross bracing to support niche.
5 Use polyurethane sealant to adhere niche to studs.
6 Seal joints between niche and backer board using polyurethane sealant or fiberglass mesh and liquid waterproof membrane
7 Install tile according to Tile Council of North America (TCNA) guidelines.
Installation in new Construction
1 Determine desired height of niche and mark 2 x 4 accordingly.
2 Install horizontal cross bracing to support niche.
3 Use polyurethane sealant to adhere niche to studs.
4 Next, install 1/2" backer board on all walls and flush to niche 1/2" flanges.
5 Seal joints between niche and backer board using polyurethane sealant or fiberglass mesh and liquid waterproof membrane.
6 Install tile according to TCNA guidelines.
Easy, Waterproof, Worry Free. The difference is CLEAR.
The "Anywhere" Solution
Listing Information
Listing Type | Gallery Listing |
Listing ID# | 76895345 |
Start Time | Thu 27 Sep 2012 19:03:00 (EDT) |
Close Time | Run Until Sold |
Starting Bid | Fixed Price (no bidding) |
Item Condition | New |
Bids | 0 |
Views | 223 |
Dispatch Time | Not given |
Quantity | 25 |
Location | United States |
Auto Extend | No |