We are not the original owners so we REALLY do NOT know much about this lot such as their condition, completeness, etc. However we will tell you what we see :-) In this LOT you get: The panel says: OMEGALARM 4012/8012 by RADIONICS INC. It measures approximately ~ 10" x ~ 6 1/2" x ~ 1 7/8" The left side has a terminal block with 10 screws The bottom side has a terminal block with 12 screws The right side has a terminal block with 10 screws with 5 screws missing. The metal enclosure says: OMEGALARM NY RADIONICS, INC. It measures approximately ~ 14 3/8" x ~ 14 1/4" x ~ 3" It has used and unused knockout (KOs) which look like approximately ~ 1/2" The top has a KO punched out The right side has one unpunched KO and one KO punched out. The bottom has an unpunched KO The left side has an unpunched KO and a red pushbutton. The front has a hole where a lock might have been removed or can be installed. 1 ea: BASLER ELECTRIC BE16V29 TRANSFORMER PRI 120V 60HZ SEC 16.5V 20VA CLASS 2 XFMR A8224 A06 1 ea: WONDRED OPTEX SX-45X POWER INPUT: 6~18VDC CURRENT DRAW: 14mA/6~18VDC ALARM OUTPUT: N.C., 28V D.C. 0.2A Has a ding in the plastic. RADIONICS INCORPORATED 12 Key KEYPAD 2 ea: NUTON DIVISION SCOVILL MODEL SA-2270 Plates with red pushbuttons 1 is missing a back part of a pushbutton 1 ea: Phone back plate 1 ea: Metal back plate 1 small length of wire This lot is UNTESTED. The alarm metal enclosure is very rusty especially on the bottom and edges. Also, it has several scratches and paint chips. Sorry but we really don't know anything about else about this lot ... It will be an AS IS sale. |