EnviroSafe, Enviro-safe, The New Modern Industrial Refrigerant Recharge Kit F-2
Notice from Seller : Credit Card payments please call 262-670-9606 CST 7:00-3:00
- Condition : New
- Dispatch : Next Day
- Brand : EnviroSafe
- ID# : 220695708
- Quantity : 99 items
(still available: 99) - Views : 21
- Location : United States
- Seller : frostyfreeze (+100318)
- Barcode : None
- Start : Sun 04 Feb 2024 13:00:54 (EDT)
- Close : Run Until Sold
- Remain : Run Until Sold
More Listings from This Seller view all
Seller's Description
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
EnviroSafe, Enviro-safe, The New Modern Industrial Refrigerant
Recharge Kit F-2
Recharge Kit F-2
EnviroSafe, Enviro-safe, The New Modern Industrial Refrigerant Kit Replaces R134 and R12
(4) 8 oz. Cans of Envirosafe R134a/R12 Replacement Refrigerant.
- Our customers asked for it and we listened!
- For automotive and other 134a applications. Works for standard small A/C units as well.
- Because Enviro-Safe 134a Replacement Refrigerant with Stop Leak, you will use up to 60% less!
- One 8 ounce can is equivalent to 21+ ounces of 134a.
- Flammable to open flame or spark. Proceed with caution if used in systems designed for non-flammable refrigerants.
(1) 4 oz. Can of Envirosafe Proseal XL4.
- Aerosol
- Forms a hard seal on metal, schrader valves, o’rings, gaskets, a/c condensers, evaporators, line sets and solder joints
- Enviro-Safe Proseal XL4 repairs minor leaks in home, heat pump, large auto, and industrial applications
- One can will normally repair a leak in systems up from 1.5 to 5 ton. If you have a smaller unit, please contact us.
- If the a/c system that will not hold a vacuum, you need to use the Enviro-Safe Prodry XL4.
- The reason for the vacuum or the use of Enviro-Safe Prodry XL4 is that it will eliminate moisture in the system. Moisture mixing with oils and refrigerant can cause you system to make sulfuric acid which will corrode and eat your system!
- For larger units over 5 tons, we suggest you use the Enviro-Safe Proseal XL4 Direct Inject. These are available in various of the larger sizes.
- Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary. If there is still Proseal XL4 in the system it will reseal the schrader.
(1) 4 oz. Can of Envirosafe Pro Dry XL4.
- Aerosol
- Should be used in all systems to prevent acid-corrosion.
- Treats 1 1/2 - 5-ton units
- Use before ProSeal XL4 to protect sealants from reacting in system.
- Can be used as a system-protector against system failure.
- Protects against leaks formed by corrosion.
- Enviro-Safe ProDry XL4 contains a dehydrating agent that converts system moisture into oil. We recommend the use of ProDry XL4 before the use of Enviro-Safe ProSeal XL4 to ensure all moisture has been removed from the air conditioning system.
- Should be used on any home A/C system that has leaked below 15 psi (running or not running) or if the system has ever leaked below 15 psi in the past. If you do not wish to use Pro Dry XL4, the system must be vacuumed prior to installing ProSeal XL4.
- When put into an A/C system that has moisture or air, Pro Dry XL4 mixes with the moisture and air in system forming a synthetic oil which then mixes with the oil in the system.
- Installs the same way as refrigerant
- Cannot be added to a fully charged system
-
(1) Professional Can Taper with "Check & Charge It Gauge.
(1) Spitfire Tool Box Sticker
(1) Part# 5045, Pocket Thermometer with protective sleeve.
Temperature Range 0 to 220 F
(1) 36" Charging Hose
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped.
*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.
EnviroSafe, Enviro-safe, The New Modern Industrial Refrigerant Kit Replaces R134 and R12 (4) 8 oz. Cans of Envirosafe R134a/R12 Replacement Refrigerant. ---Our customers asked for it and we listened! ---For automotive and other 134a applications. Works for standard small A/C units as well. ---Because Enviro-Safe 134a Replacement Refrigerant with Stop Leak, you will use up to 60% less! ---One 8 ounce can is equivalent to 21+ ounces of 134a. ---Flammable to open flame or spark. Proceed with caution if used in systems designed for non-flammable refrigerants. (1) 4 oz. Can of Envirosafe Proseal XL4. ---Aerosol ---Forms a hard seal on metal, schrader valves, o’rings, gaskets, a/c condensers, evaporators, line sets and solder joints ---Enviro-Safe Proseal XL4 repairs minor leaks in home, heat pump, large auto, and industrial applications ---One can will normally repair a leak in systems up from 1.5 to 5 ton. If you have a smaller unit, please contact us. ---If the a/c system that will not hold a vacuum, you need to use the Enviro-Safe Prodry XL4. ---The reason for the vacuum or the use of Enviro-Safe Prodry XL4 is that it will eliminate moisture in the system. Moisture mixing with oils and refrigerant can cause you system to make sulfuric acid which will corrode and eat your system! ---For larger units over 5 tons, we suggest you use the Enviro-Safe Proseal XL4 Direct Inject. These are available in various of the larger sizes. ---Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary. If there is still Proseal XL4 in the system it will reseal the schrader. (1) 4 oz. Can of Envirosafe Pro Dry XL4. ---Aerosol ---Should be used in all systems to prevent acid-corrosion. ---Treats 1 1/2 - 5-ton units ---Use before ProSeal XL4 to protect sealants from reacting in system. ---Can be used as a system-protector against system failure. ---Protects against leaks formed by corrosion. ---Enviro-Safe ProDry XL4 contains a dehydrating agent that converts system moisture into oil. We recommend the use of ProDry XL4 before the use of Enviro-Safe ProSeal XL4 to ensure all moisture has been removed from the air conditioning system. ---Should be used on any home A/C system that has leaked below 15 psi (running or not running) or if the system has ever leaked below 15 psi in the past. If you do not wish to use Pro Dry XL4, the system must be vacuumed prior to installing ProSeal XL4. ---When put into an A/C system that has moisture or air, Pro Dry XL4 mixes with the moisture and air in system forming a synthetic oil which then mixes with the oil in the system. ---Installs the same way as refrigerant ---Cannot be added to a fully charged system --- (1) Professional Can Taper with "Check & Charge It Gauge. (1) Spitfire Tool Box Sticker (1) Part# 5045, Pocket Thermometer with protective sleeve. Temperature Range 0 to 220 F (1) 36" Charging Hose
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
EnviroSafe, Enviro-safe, The New Modern Industrial Refrigerant
Recharge Kit F-2
Recharge Kit F-2
EnviroSafe, Enviro-safe, The New Modern Industrial Refrigerant Kit Replaces R134 and R12
(4) 8 oz. Cans of Envirosafe R134a/R12 Replacement Refrigerant.
- Our customers asked for it and we listened!
- For automotive and other 134a applications. Works for standard small A/C units as well.
- Because Enviro-Safe 134a Replacement Refrigerant with Stop Leak, you will use up to 60% less!
- One 8 ounce can is equivalent to 21+ ounces of 134a.
- Flammable to open flame or spark. Proceed with caution if used in systems designed for non-flammable refrigerants.
(1) 4 oz. Can of Envirosafe Proseal XL4.
- Aerosol
- Forms a hard seal on metal, schrader valves, o’rings, gaskets, a/c condensers, evaporators, line sets and solder joints
- Enviro-Safe Proseal XL4 repairs minor leaks in home, heat pump, large auto, and industrial applications
- One can will normally repair a leak in systems up from 1.5 to 5 ton. If you have a smaller unit, please contact us.
- If the a/c system that will not hold a vacuum, you need to use the Enviro-Safe Prodry XL4.
- The reason for the vacuum or the use of Enviro-Safe Prodry XL4 is that it will eliminate moisture in the system. Moisture mixing with oils and refrigerant can cause you system to make sulfuric acid which will corrode and eat your system!
- For larger units over 5 tons, we suggest you use the Enviro-Safe Proseal XL4 Direct Inject. These are available in various of the larger sizes.
- Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary. If there is still Proseal XL4 in the system it will reseal the schrader.
(1) 4 oz. Can of Envirosafe Pro Dry XL4.
- Aerosol
- Should be used in all systems to prevent acid-corrosion.
- Treats 1 1/2 - 5-ton units
- Use before ProSeal XL4 to protect sealants from reacting in system.
- Can be used as a system-protector against system failure.
- Protects against leaks formed by corrosion.
- Enviro-Safe ProDry XL4 contains a dehydrating agent that converts system moisture into oil. We recommend the use of ProDry XL4 before the use of Enviro-Safe ProSeal XL4 to ensure all moisture has been removed from the air conditioning system.
- Should be used on any home A/C system that has leaked below 15 psi (running or not running) or if the system has ever leaked below 15 psi in the past. If you do not wish to use Pro Dry XL4, the system must be vacuumed prior to installing ProSeal XL4.
- When put into an A/C system that has moisture or air, Pro Dry XL4 mixes with the moisture and air in system forming a synthetic oil which then mixes with the oil in the system.
- Installs the same way as refrigerant
- Cannot be added to a fully charged system
-
(1) Professional Can Taper with "Check & Charge It Gauge.
(1) Spitfire Tool Box Sticker
(1) Part# 5045, Pocket Thermometer with protective sleeve.
Temperature Range 0 to 220 F
(1) 36" Charging Hose
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped.
*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.
Listed with ExportYourStore.com
Exported By ExportYourStore
Listing Information
| Listing Type | Gallery Listing |
| Listing ID# | 220695708 |
| Start Time | Sun 04 Feb 2024 13:00:54 (EDT) |
| Close Time | Run Until Sold |
| Starting Bid | Fixed Price (no bidding) |
| Item Condition | New |
| Bids | 0 |
| Views | 21 |
| Dispatch Time | Next Day |
| Quantity | 99 |
| Location | United States |
| Auto Extend | No |
