Aluminum Restore - Classic 1 Bottle: Anodized Auto Trim "Quick Polish" Kit

Aluminum Restore™ RESULTS:

•Instantly Replenish aluminum's original sealant.

•Remove Haziness. Return trim to a newer, brighter appearance.

•UV Block Penetrates and Protects trim's appearance.

Kit Contents:

•1 Pre-Treated Prep Cloth packet.

•1 oz of Aluminum Restore™ detailing solution with UV protection.

•1 lint-free Applicator Cloth.

•1 pair light weight work gloves.

• Instruction Sheet.

Save money, save time. Aluminum re-anodization can cost hundreds of dollars and require sending metal parts to professional shops.

Restore aluminum trim's sealant instantly, creating a newer look, and for a fraction of the cost - while auto trim remains on vehicle.

DETERMINING IF ALUMINUM RESTORE™ IS RIGHT FOR YOUR JOB: If the anodized aluminum surface has weathered away, and not only the binder sealing the porous anodized surface is missing, but the anodizing itself is gone, Aluminum Restore™ will not be able to bring back the metal's brightness. In such cases, the aluminum will need to be polished by other means. If your car’s trim still retains its anodized surface however, Aluminum Restore™ has a good chance of removing its milky haze, restoring brightness.

NOTE: Aluminum Restore™ is specifically formulated not to harm painted surfaces that are in good condition. If AR™ contacts paintwork, simply wipe away with a cloth while still wet. HOWEVER, care should be taken to keep the Aluminum Restore™ solution off of paint that is faded, porous, or that needs to be polished or waxed when it is adjacent to aluminum that is being treated. This could create uneven paint lustre if the AR™ solution were to overlap the paintwork.

RENEWAL AND RE-APPLICATION: Your anodized surfaces treated with Aluminum Restore™ may need renewal if haziness or a milky appearance develops over time, due to exposure to strong sunlight or the elements of weather such as in outdoor winter conditions. 

Renewal of Aluminum Restore™ consists of a repeat process of your original auto detailing with the AR™ solution. Simply re-apply the AR™ detailing solution after cleaning and drying the aluminum surface. 

If hazing and milkiness do not resolve, you can quickly remove the previous AR™ coating with a strong solvent, such as acetone, on a cloth. Then re-apply the AR™ detailing solution according to original application instructions. 

Always be careful not to allow solvents or the AR™ detailing solution to contact adjacent paint or other surfaces.

Warning! Keep away from children. Contains petroleum solvents. Prolonged and repeated skin contact may cause drying of the skin. 

Precautions: Keep away from children and flames, heat, sparks, and other ignition sources. Avoid breathing vapors. Use only in well ventilated area. Avoid skin and eye contact. Wash thoroughly after handling. First Aid: If swallowed call emergency response or physician immediately. If inhaled, breathe fresh air. In case of eye contact, flush thoroughly with water. In case of skin contact, wash thoroughtly with soap and water. Do not ingest. 

Made in USA

Distributed by Aluminum-Restore.com Great Barrington, MA 01230

ALUMINUM RESTORE™ and  AR™ are trademarks of Aluminum Restore™