Cisco Aironet 1130AG WAP Wireless Access Point w/Adapter AIR-LAP1131AG-A-K9 POE
- Condition : Used
- Dispatch : 3 Days
- Brand : Cisco
- ID# : 199279795
- Quantity : 4 items
(still available: 4) - Views : 731
- Location : United States
- Seller : bizsurplus (+90)
- Barcode : 882658058172
- Start : Wed 20 Oct 2021 22:53:31 (EDT)
- Close : Run Until Sold
- Remain : Run Until Sold
More Listings from This Seller view all
Seller's Description
| |
Cisco Aironet 1130AG WAP Wireless Access Point AIR-LAP1131AG-A-K9 POE
Auction Includes 1130AG access point unit.
The ready-to-install, easy-to-manage access point offers high capacity, high security, enterprise-class features to deliver wireless LAN access with a low total cost of ownership. Designed for coverage in offices and similar RF environments, this unobtrusive access point includes integrated antennas and dual IEEE 802.11a/g radios for comprehensive and predictable coverage, delivering a combined capacity of 108 Mbps.
Product Overview
CiscoAironet1130AG Series IEEE 802.11a/b/g access points provide high-capacity, high-security, enterprise-class features in an unobtrusive, office-class design, delivering WLAN access with the lowest total cost of ownership. With high-performing dual IEEE 802.11a and 802.11g radios, the Cisco Aironet 1130AG Series provides a combined capacity of up to 108 Mbps to meet the needs of growing WLANs. Hardware-assisted Advanced Encryption Standard (AES) or temporal key integrity protocol (TKIP) encryption provides uncompromised support for interoperable IEEE 802.11i, Wi-Fi Protected Access 2 (WPA2) or WPA security. The Cisco Aironet 1130AG Series uses radio and network management features for simplified deployment, along with built-in omnidirectional antennas that provide robust and predictable WLAN coverage for offices and similar RF environments. The competitively priced Cisco Aironet 1130AG Series is ready to install and easy to manage, reducing the cost of deployment and ongoing maintenance.
The Cisco Aironet 1130AG Series is available in two versions: unified or autonomous. Unified access points operate with the Lightweight Access Point Protocol (LWAPP) and work in conjunction with Cisco wireless LAN controllers and the Cisco Wireless Control System (WCS). When configured with LWAPP, the Cisco Aironet 1130AG Series can automatically detect the best-available Cisco wireless LAN controller and download appropriate policies and configuration information with no manual intervention. Autonomous access points are based on Cisco IOSSoftware and may optionally operate with the CiscoWorks Wireless LAN Solution Engine (WLSE). Autonomous access points, along with the CiscoWorks WLSE, deliver a core set of features and may be field-upgraded to take advantage of the full benefits of the Cisco Unified Wireless Network as requirements evolve.
The Cisco Aironet 1130AG Series delivers optimal value for offices and similar environments. Built-in antennas provide omnidirectional coverage specifically designed for today's open workspaces. A multipurpose mounting bracket easily secures Cisco Aironet 1130AG Series access points to ceilings and walls. With an unobtrusive design, Cisco Aironet 1130AG Series access points are aesthetically pleasing and blend into their environments. For maximum concealment, the access point may be placed above ceilings or suspended ceilings. The UL 2043 rating of the Cisco Aironet 1130AG Series allows the access point to be placed above ceilings in plenum areas regulated by municipal fire codes. Offered at a competitive price, and optimized for easy installation and operation, the Cisco Aironet 1130AG Series helps organizations attain a lower total cost of ownership.
Applications
In offices and similarly open environments, Cisco Aironet 1130AG Series access points may be installed on the ceiling to provide users with continuous coverage as they roam throughout a facility. In school buildings and similar facilities, the access points may be installed on the ceiling of each room and hallway to provide users with full coverage and high network availability. In areas where a ceiling installation may not be practical such as retail hotspots or similar small facilities, the access points can be mounted simply and securely on walls for complete coverage with minimal installation cost.
Features and Benefits
Table 1 lists features and benefits of Cisco Aironet 1130AG Series access points.
Table 1. Features and Benefits of Cisco Aironet 1130AG Series Access Points
Features:
Dual 802.11a and 802.11g Radios
Provides up to 108 Mbps of capacity in a single device for industry-leading capacity and backward compatibility with legacy 802.11b clients.
Supports 15 Nonoverlapping Channels
Lower potential interference with neighboring access points simplifies deployment
Fewer transmission errors deliver greater throughput
Industry-Leading Radio Design
Provides robust signals to long distances
Mitigates the effects of multipath signal propagation for more consistent coverage
Variable Transmit Power Settings
Allows access point coverage to be tuned for differing requirements
Low-dBm setting supports closer spacing of access points in high-density deployments
Integrated Antennas
Complete system is deployable out of the box without external antennas
Specifically designed to provide omnidirectional coverage for offices and similar radio frequency environments
Hardware-Assisted AES Encryption
Provides high security without performance degradation
Cisco Unified IDS/IPS
This integrated software feature is part of the Cisco Self-Defending Network and is the industry's first integrated wired and wireless security solution. When a trusted client acts maliciously, the wired IDS detects the attack and sends shun requests to Cisco WLAN controllers, which will then disassociate the client device.
Management Frame Protection
This feature provides for the authentication of 802.11 management frames by the wireless network infrastructure. This allows the network to detect spoofed frames from access points or malicious users impersonating infrastructure access points. If an access point detects a malicious attack, an incident will be generated by the access points and reports will be gathered on the Cisco wireless LAN controller, Cisco WCS, or CiscoWorks WLSE.
IEEE 802.11i-Compliant; WPA2-Certified and WPA-Certified
Helps to ensure interoperable security with wireless LAN client devices from other manufacturers
Low-Profile Design
Unobtrusive design blends in to environment
"Quiet" LED does not draw attention to it when operating normally and no action is required
Multipurpose and Lockable Mounting Bracket
Installs easily to walls, ceilings, and suspended ceiling railways
Accommodates standard padlock to prevent theft
Inline Power Support (IEEE 802.3af and Cisco Inline Power)
Provides an interoperable alternative to AC power
Simplifies deployment by allowing power to be supplied over the Ethernet cable
Compatible with 802.3af-compliant power sources
Item is in good physical condition. Item powers up.
Auction Includes 1130AG access point unit. Wall mount bracket is not included.
|
![]() ![]() ![]() |
By bidding on this auction you agree to the following terms: Shipping Terms:
Payment Terms:
International Terms: (These terms only apply to international shipments.)
Warranty Terms:
Return Terms:
Shipping Damage Terms:
Medical Terms:
If any provision of this Auction Contract is held unenforceable, All remaining provisions of this Contract shall remain in full force and effect. Copyright 2018 Qualitybizequipment - All Rights Reserved. |
Listing Information
Listing Type | Gallery Listing |
Listing ID# | 199279795 |
Start Time | Wed 20 Oct 2021 22:53:31 (EDT) |
Close Time | Run Until Sold |
Starting Bid | Fixed Price (no bidding) |
Item Condition | Used |
Bids | 0 |
Views | 731 |
Dispatch Time | 3 Days |
Quantity | 4 |
Location | United States |
Auto Extend | No |
Seller Recent Feedback
Returns Policy
Returns Accepted
Refund Type: Money Back
Shipping Cost Paid by: Buyer
Returns Within: 14 Days