sky lancer to jamma adaptor

Arcade supergun MK III is compatible with NeoGeo MVS motherboards and JAMMA arcade pcbs. DC type microswitch arcade controls can be directly wired to the two 10 way terminal blocks. The pcb legend identifies the connections. 6 button games can be played. The gamer will have to directly connect the 3 kick buttons from the arcade pcb kick harness to the DC type arcade controls.

 A 3 way terminal block has connections for NeoGeo select and test functions.

 
I have included a Mono/Stereo switch to allow the gamer to select either JAMMA sound which is mono or

NeoGeo sound which is stereo.

The video output is SCART which is manly used in Europe. It gives a higher quality picture than composite or

S-video. In some models of TV you may have to manually select the SCART channel by using the on screen display menu.

You can use a wide range of passive speakers, from 2W to 15W but ideally i recommend you use stereo passive speakers with a combined Speaker power of 10W and each speaker having  8 ohms impedance.

You can use a wide range of ATX power supplies, from 100W to 600W but ideally i recommend you use one with a 400W Power rating and have an on/off switch.

Please switch off the TV before changing arcade pcbs attached to the arcade supergun. A power surge on the TV set’s SCART socket could damage the TV.

Please email me for any help at       

This adaptor will help anybody interested playing the old retro arcade pcbs from the 1970s to the 2000s.  The original arcade pcbs are collectors items. It is worth buying them. A lot of gamers dont have the original cabinet associated with the arcade pcb mentioned in the title.  A cheaper way is to use a jamma cabinet. The adaptor will connect the arcade pcb mentioned in the title to the jamma cabinet