Billigare än eBay
BSA FINNED ALLOY SUMP PLATE ROCKET GOLD STAR A7 A10 A65 WITH FILTER (67-1285)
- Skick : Ny
- Frakt : 2 dagar
- Märke : unbranded
- ID# : 225190958
- Antal : 2 föremål
(fortfarande tillgängliga: 2) - Visningar : 30
- Plats : Storbritannien
- Säljare : nookys.nuts (+8)
- Streckkod : Inga
- Start : Lör 21 dec 2024 10:20:01 (CEST)
- Stängning : Pågår till såld
- Tid kvar : Pågår tills såld
Internationell Frakt till Sverige 
för 1 föremål ändra
för 1 föremål ändra
Övrig Intl Frakt = £13.00 (168,44 kr)
Övrig Intl Frakt = £20.00 (259,13 kr)
till Norge, Irland, Europa, Spanien, Nederländerna, Tyskland, Frankrike, Sverige, Italien, Österrike, Belgien, Danmark, Portugal
Övrig Intl Frakt = £20.00 (259,13 kr)
till Portugal, Indien, Danmark, Nya Zeeland, Nordamerika, Italien, Österrike, Belgien, Sydafrika, Tyskland, Frankrike, Australien, Sverige, Singapor, Sydamerika, Afrika, USA, Malaysien, Nederländerna, Irland, Asien, Europa, Spanien, Kanada, Brasilien, Hong Kong, Norge, Oceanien
Frakt Räknare
Mer annonser från denna säljare se alla
Säljarens beskrivning
Brand new BSA alloy finned sump plate with magnetic drain plug, filter, two gaskets, 4 long studs, 4 nuts and 4 washers. This set includes gauze filter (71-1126).
Also included are 4 reduced hexagon 1/4" 26tpi nuts and 4 washers. Long studs are considered the best option for fitting the sump plate. For BSA 'A' series; A7, A10, RGS models (Can fit A65 but needs machining out or relieving to accommodate aftermarket filter gauze). Good quality.
To replace BSA part number 67-1285 and 41-0620. (Will not fit B25 part number 67-1286).
Thickness
- these sump plates are thicker than original scavenger plates, so they
hang down lower. 37.4mm is the thickness including the screw. Without
the screw, the thickness is 29mm.
A65s may require machining or relieving - If using original filters there should not be a problem . However if used with aftermarket filters, such as the one provided with this set, then machining would be required. Aftermarket gauze filters have a lip on that does not fit flush with the sump plate. Therefore the large hole in the sump plate requires a small amount of machining to accommodate it. If you are unsure or do not have the knowledge/expertise to undertake any machining then please do not buy. Once the sump plate has been damaged in anyway, it cannot be returned.
Includes brand new BSA sump plate filter to fit A7, A10 and A65 (But sump plate will require machining on an A65, see above). Stainless steel. This is a suitable replacement for BSA part number 71-1126. This filter can be used to replace the original welded in filter but also fits this aftermarket alloy sump plate.
I also stock this sump plate without the aftermarket filter; item number: 300938887854.
I also stock the gauze filter on its own, search item number: 303434517753.
Nooky's Nuts have been trading cycle thread and bsf nuts, bolts and washers for many years at autojumbles across the country.
Nooky's nuts now have a website.
If you purchase multiple items, we will weigh the items and invoice accordingly, however if it is heavy, there may not be a discount, if it is light, then there possibly will. We will try to make p&p as low as possible. However bear in mind that the postage cost paid is for packaging also.
Annonsinformation
| Annonstyp | Galleriannons |
| Annons-ID: | 225190958 |
| Starttid | Lör 21 dec 2024 10:20:01 (CEST) |
| Sluttid | Pågår till såld |
| Startbud | Fast pris (ingen budgivning) |
| Produktvillkor | Ny |
| Bud | 0 |
| Visningar | 30 |
| Avsändningstid (inkluderar inte söndagar) | 2 dagar |
| Antal | 2 |
| Plats | Storbritannien |
| Auto-förläng | Nej |
Säljarens senaste Feedback
Returpolicy
Returer accepteras
Refund Type:
Shipping Cost Paid by: Buyer
Returns Within: 30 days
