STABILIZER CURRENT REGULATOR VOLTAGE MAX 3000W OUTPUT OF 230 VOLTS

High protection and precision of up to 3000 Watts automatic voltage regulator

High-efficiency: rapid response with high precision output voltage

Application: Computers, HIFI, lighting system, refrigerator, medical instrument system, TVs, air-conditioning, security, experimental equipment, communication systems, surveillance equipment and other < span class = ""notranslate"" ></span> equipment electric

This product is a high-precision servo-motor type voltage stabilizer. Low power consumption. Reliable work. High accuracy of stabilization. Good for use in regions where the network voltage is variable or high current peaks.

Input voltage: 160V-260V

With indicator of output voltage: AC220V + 2%

Especificaciones:

Model: SVC-3000WS

Rated power: 3000 W

160 input voltage V AC 250 V AC

Output voltage: 220 Vac +/-3%

Rated frequency: 50 Hz - 60 Hz

Response regulation time: 4 seconds

Regulation accuracy: ± 2%

Speed regulation: > 10 v / s

Efficiency, efficiency: > 95

Frequency distortion: < 1,0%

Overload Protection

Output voltage indicator

3 LED for the indication of the current state

Working temperature: - 5 ° C to 40 ° C

Maximum working temperature: 60 ° C

Relative humidity: 90%

The useful device is essential for use in places where there are frequent inclines of tension, very useful to protect your equipment electronic

Do not confuse with a UPS that is stabilizer not supplies current if there is a power outage - not has of any battery cumulative

Consider the following recommendations when choosing a stabilizer:

-The rated power of the stabiliser can be up to 30% higher than the power of the consumer

-When the stabilizer is used to power an inductive or capacitive load, such as motors, refrigerators etc, the stabilizer must have 3-5 times with one power greater than the team to use, for example if you use a 600W cooler the stabilizer must support 1800W to 3000W

Failure to comply with these conditions the stabilizer can overload and damage

Automatic voltage regulator fully protection & high precision

Efficacy: fast starting, quick response, fully protection, high precision output voltage

Application: Computers, Duplication, ILLumination system, Medical instrument Refrigerator, Safety warning equipment, Program - controlled telephone, Experimental instrument, Communication system, TV sets, Air-condition

This product is a servo motor-type high accuracy household voltage stabilizer. Low Power consumption. Reliable work. High accuracy of stabilization. Good for use in Regions where the net voltage is fluctuating much. Input voltage: 160v-250v With over current protector with output voltage indication output voltage: Ac220v + 2%

Specifications:

Model: SVC-3000WS

Rated power: 3000 W, with resistive load, cos (fi) = 1

Input voltage from 160 Vac to 260 Vac

Output voltage: 220 Vac +/-3%

Rated frequency: 50 Hz - 60 Hz

Response time of regulation: 4 s

Accuracy class of regulation: ± 2%

Speed regulation: > 10 v / s

Effectiveness, Efficiency: > 95

Frequency distortion: < 1.0%

Overload Protection

Turnout for output voltage indicator

3 LEDs (LED) for indication of the current state

Working temperature: - 5 ° C to + 40 ° C

Maximum operating temperature: 60 ° C

Relative humidity: 90%

The device useful it is critical for use in low voltage problems in cases where very often permanently damaged appliances

When choosing a stabilizer please note the following recommendations:

-The nominal power of the stabilizer can be up to 30% higher than the power of the consumer

-When the stabilizer is used to power an inductive or capacitive load, such as motor, refrigerator and more. the stabilizer should be from 3 to 5 times with large power!

Failure to comply with these conditions stabilizer can be overloaded and damaged.