R409a, 8 oz. ASHRAE, EPA & SNAP R12 Approved Drop-in, Taper & Gauge
- Condition : New
- Dispatch : Next Day
- Brand : Frosty Freeze AC Products Company
- ID# : 219449960
- Quantity : 36 items
(still available: 36) - Views : 27
- Location : United States
- Seller : frostyfreeze (+100319)
- Barcode : None
- Start : Sat 14 Oct 2023 09:01:22 (EDT)
- Close : Run Until Sold
- Remain : Run Until Sold
Seller's Description
(1) R409a, 8 oz. New Style Self-Sealing Can, ASHRAE, EPA & SNAP R12 Approved Drop-in Replacement 409a
(1) K28 Can Taper with check and charge-it gauge.
The hose connection is 1/4' male flare.
The can is the new "Self-Sealing" Can as required by the EPA.
This can has the new "self-sealing" top connection and requires a K28 Can Taper to access the gas which is included in this listing.
Once you have the K28 can taper it will work on all our 8, 10,12 and 14 oz. aerosol cans.
ASHRAE, EPA & SNAP Approved Drop-in Replacement
R409a is Environment friendly and a EPA, ASHRAE & SNAP Approved replacement for R12.
R409a is the LOWEST GWP and is a NON-FLAMMABLE Retrofit Replacement Refrigerant for R12.
R409a has an ASHRAE designation of R-409a and is now available in the United States.
This NEW revolutionary refrigerant is the #1 retrofit replacement for R12 in Commercial Refrigeration Applications.
R409a is the LOWEST GWP and the Only NON-FLAMMABLE Retrofit Replacement Refrigerant for R12 in commercial refrigeration applications.
A1-ASHRAE Certified
*No Oil Changes
*No System Changes Required
*Made in the USA
The only refrigerant we use for all R12 commercial refrigeration applications!
The refrigerant does not require design modifications or component changes
Clearly label the system to show it contains R409a.
A equipment label is provided.
1) Ensure the right equipment is available (e.g., recovery unit and cylinders, container for recovered lubricant, vacuum pump, weighing scales, replacement drier, etc.)
2) Record baseline data to establish the normal operating conditions for the equipment
3) Check the manufacturer’s specifications for the unit to find the recommended R12 charge in order to determine the amount of R409a to add.
4) Replace the filter/drier if moisture is suspected in the system. This is not necessary on a sealed system.
5) Having evacuated the system, liquid charge the unit with R409a up to 90% of the original charge amount of R12 and then compare to baseline data.
6) Switch on the unit and compare the baseline data, monitor sight glasses, suction line pressure and temperature, and discharge temperature; add additional R409a up to the recommended R12 system charge amount as needed.
7) Check system thoroughly for leaks; and repair as needed.
8) Clearly label the system to show it contains R409a.
****You will receive a label with the refrigerant.
Switch on the unit and compare the baseline data, monitor sight glasses, suction line pressure and temperature, and discharge temperature; add additional R409a up to the recommended R12a system charge amount as needed.
A retrofit blend for R-12 refrigeration systems.
The pressure and system capacity match R-12 when the blend is running in a 10°F to 20°F evaporator, and there is typically 13°F temperature glide in the evaporator.
Applications: direct expansion refrigeration and air conditioning systems designed for R-12 or R-500; good success in any size system, minor adjustment of controls needed.
Discharge pressure and temperature increases compared to R-12, which may be a problem in very hot ambient conditions.
Capacity holds well into lower application temperatures (-30°F).
R-409A mixes well with mineral oil down to 0°F.
As a result it may not be necessary to change oil in systems which do not run colder than 0°F in the evaporator (below 0°F alkylbenzene should replace some mineral oil).
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped.
*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.
Exported By ExportYourStore
Listing Information
| Listing Type | Gallery Listing |
| Listing ID# | 219449960 |
| Start Time | Sat 14 Oct 2023 09:01:22 (EDT) |
| Close Time | Run Until Sold |
| Starting Bid | Fixed Price (no bidding) |
| Item Condition | New |
| Bids | 0 |
| Views | 27 |
| Dispatch Time | Next Day |
| Quantity | 36 |
| Location | United States |
| Auto Extend | No |
