1970 Chevy Chevelle 2WD Mini No Prep RC Drag Car Brushless RTR 1/16, Black

Watch This Video

A MINI RIVALRY - THE FIRST MINI RC DRAG CAR - LOSI 1970 CHEVY CHEVELLEVideo will open in a new window

Using the App? Paste link into a browser window:

https://www.youtube.com/embed/YbqrLx4J3bQ?rel=0

Based on our Mini 22 platform, the Losi® 1970 Chevelle 2WD Mini No Prep Drag Car gives new RC drivers an easy, low-cost way to compete. If you're a serious racer, you'll have lots of high-performance fun running a mini version of your 1/10 scale car!

Product Details

 In The Box

(1) Losi® 1970 Chevelle 2WD Mini No Prep Drag Car BL RTR

(1) Spektrum™ SLT2™ 2-Channel 2.4GHz Transmitter

(4) AA Transmitter Batteries

(1) 7.4V 800mAh 2S 50C LiPo Hard Case w/ EC2™ Connector

(1) USB Charger

(1) Product Manual

(3) Optional Rear Toe-blocks

Tools

 Needed to Complete

Includes everything needed — no other purchases required.

Overview

Drag racing is one of the purest forms of competition. It seems simple, trying to outrun your opponent over a relatively short distance in a straight line. But the simpler the race, the more evenly matched any two competitors will be. That's what makes the ready-to-run Losi® 1970 Chevelle 2WD Mini No Prep Drag Car so much fun for new RC hobbyists and experienced competitors alike. It's an easy, inexpensive way to experience drag racing thrills while enjoying the scale looks of an iconic American muscle car.

Of course, it's natural to think that larger is better, faster is more fun, and a course with higher jumps and more turns is the ultimate place to race. The truth? Driving a somewhat slower vehicle over fewer obstacles means there's less to go wrong and put an end to the action. You'll spend more time competing and having uninterrupted fun with the Losi® 1970 Chevelle 2WD Mini No Prep Drag Car.

It will be a bigger blast than you can imagine. The 1970 Chevelle 2WD Mini No Prep Drag Car isn't just for modelers who already know and love the Losi Mini 22 platform, or for racers who want a mini version of their high-end 1/10 scale drag car. It's for everyone who enjoys the fun of competing — with special appeal to fans of the Chevy Chevelle, drag racing, or mini RC vehicles.

The Losi 1970 Chevelle 2WD Mini No Prep Drag Car offers new and younger racers a great way to get started in the hobby. For serious RC drag racers it's an alternative to the stresses of high stakes competition, a convenient way to just have some high-performance fun. You'll feel free to run it anytime you like, without adding wear and tear to your larger, more expensive 1/10 scale drag car.

There's no other RC car like the Losi 1970 Chevelle 2WD Mini No Prep Drag Car. It's ready to run, brushless powered, built on the proven Losi Mini 22 platform, with an officially licensed 1970 Chevy Chevelle muscle car body and a chassis whose wheelbase adjusts to accommodate other mini body styles you might prefer.

Get together with a friend. Take your Losi 1970 Chevelle 2WD Mini No Prep Drag Cars to the local park, an empty parking lot, wherever there's a relatively smooth concrete, black top, or cement surface. Picture a flag going down or a light turning green — and punch the throttle.

Officially licensed 1970 Chevy Chevelle body with molded details and LED head and tail lights

Factory-installed 6000Kv 2-in-1 brushless power system

Proven Mini 22 platform based on the Losi® Mini-T™ and Mini-B™

Multi wheelbase chassis accommodates other on-road mini bodies

Officially licensed Mickey Thompson front and rear tires with realistic looks and performance

Features

Officially licensed 1970 Chevy Chevelle body with molded details and LED head and tail lights

Factory-installed 6000Kv 2-in-1 brushless power system

Proven Mini 22 platform based on the Losi® Mini-T™ and Mini-B™

Multi wheelbase chassis accommodates other on-road mini bodies

Officially licensed Mickey Thompson front and rear tires with realistic looks and performance

Comes with a high capacity 2S 800mAh LiPo battery and convenient USB charger

Multiple suspension tuning options to optimize your set up for specific track conditions

Transmission based on the TLR® (Team Losi Racing®) 3-gear mid motor transmission

OFFICIALLY LICENSED 1970 CHEVY CHEVELLE BODY

The officially licensed 1970 Chevy Chevelle body includes molded parts for added scale detail, such as bumpers, grille, and LED head and tail lights.

BRUSHLESS POWERED

It may look simple, but the installed 6000Kv 2-in-1 brushless power system will get you down a 1/16 scale, 82.5 foot long drag strip fast! The integrated ESC on the back of the motor can be tuned to your driving preference,

PROVEN MINI 22 PLATFORM

The 1970 Chevelle 2WD Mini No Prep Drag Car is based on the Mini 22 platform found in Losi® Mini-T™ and Mini-B™ vehicles and shares most of the same parts.

MULTI WHEELBASE CHASSIS

In stock form, the 1970 Chevelle 2WD Mini No Prep Drag Car has a 239mm wheelbase. It can be shortened by 14mm to 225mm, however, in order to accommodate other on-road mini bodies.

OFFICIALLY LICENSED MICKEY THOMPSON TIRES

The officially licensed Mickey Thompson front and rear tires look just like the real tires found on most big tire drag cars — and they perform just as well on the strip!

LIPO BATTERY & USB CHARGER INCLUDED

Our high capacity 2S 800mAh LiPo battery is included to give you the best performance. Its convenient USB charger can be plugged into any USB port or USB block you already own.

FULLY TUNABLE SUSPENSION & WHEELIE BAR

Multiple suspension tuning options, including camber, toe, ride height, and wheelie bar angle, allow you to optimize your set up for specific track conditions. Three optional toe blocks are included to get you started.

PERFORMANCE TRANSMISSION

The 1970 Chevelle 2WD Mini No Prep Drag Car's performance transmission is based on the TLR® (Team Losi Racing®) 3-gear mid motor transmission. Its metal internal gears are tied to an adjustable slipper clutch to fine-tune the power delivery.

Product Specs

Motor Type

Brushless

Speed Control

Included

Wheelbase

9.4" (239 mm)

Bushing Material

Plastic

Charger

Included

Differential

Bevel Gear

Receiver

Included

Shock Type

7mm Bore, Oil Filled

Product Weight

1.5 lb (0.7kg)

Tire Tread

Mickey Thompson ET

Vehicle Type

Drag Car

Battery

Included

Connector Type

EC2

Ground Clearance

0.5 in (12.5mm)

Product Length

17.75" (451 mm)

Spur Gear

60T

Suspension

Independent

Vehicle Size

Mini

Product Width

6.5" (165 mm)

Radio

Included

Ball Bearings

Complete (Less Steering)

Chassis

1.5mm Plate, 6061-T6 Aluminum

Completion Level

Ready-To-Run

Drivetrain

2WD

Drive Type

Forward/Brake/Reverse

Make

CHEVY

Product Height

4" (102 mm)

Tire Compound

Medium

Power Type

Electric

Gear Pitch

0.5 MOD

Servos

Included

Approximate Assembly Time

Less than 1 Hour

Body

Polycarbonate, Painted

Brakes

Integral with ESC

Pinion

17T

Scale

1/16

Warranty

All warranty claims must be handled through Losi directly and not RC-Tradingpost. If you have any questions about the operation of your vehicle or believe you have received a defective item you must contact Losi directly.

These warranties cover defects with the materials, workmanship, or assembly at factory only. All replacement parts and warranty approvals are at the sole discretion of Losi. These warranties do not cover breakage due to abuse, improper break-in, improper setup, or improper operation. By purchasing this item you agree to the terms of this warranty.

USA Customers Please Note:

Orders valued over $750 WILL require signature for delivery. Orders valued under $750 will NOT require signature for delivery. What this means to you is that you need to ensure a safe location for your delivery. We are not responsible for theft occurring once the package has been delivered. We recommend signing up for notifications of package delivery from Fedex or USPS (depending on which service we use to ship your package). You can find that information on the Fedex or USPS website.

International Customers Please Note:

All of our electric powered vehicle chargers and optional chargers use 110v power source. If your house has 220v power you will need a converter to use our chargers.  Local taxes and customs duties usually apply and are added once your shipment reaches its destination usually by your countries customs office. Please contact your customs office for more information. RC-Tradingpost does not know when additional charges such as additional brokerage fees will apply. These additional charges are the responsibility of the buyer. Refused or returned shipments in which RC-Tradingpost incurs additional shipping fees will be assessed on the return credit. Please do not request that we falsify your invoices, mark the order as a "gift" or suppress tariff codes and country-of-origin information. Nitro Fuel, Paint or other flammable items are only available to USA customers, we cannot ship flammable items outside of the continental USA.